Towards Logistics 4.0: A Skill-Based OPC UA Communication between WMS and the PLC of an Automated Storage and Retrieval System

In order to bring intralogistics systems to the same level of interoperability as today’s modern production systems, logistics must take the essential steps towards Industry 4.0. This requires an increasing abstraction level of control logic as an enabler for horizontal and vertical integration. The abstraction will lead to the interconnection of manufacturing and logistics control with the production planning and warehouse management systems (WMS). A main enabler for these communication paths are service-oriented architectures (SoA). OPC UA has established itself as a widely used and already adopted SoA-based communication standard in industry. The paper describes the realization of an OPC UA-based approach for the communication between a WMS and a PLC of an automated storage and retrieval system (ASRS). The conceptual basis of communication design are skills of the ASRS. The work is supported by an architectural design with a subsequent prototypical implementation

Guidelines for the use and interpretation of assays for monitoring autophagy (3rd edition)

In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. For example, a key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process versus those that measure fl ux through the autophagy pathway (i.e., the complete process including the amount and rate of cargo sequestered and degraded). In particular, a block in macroautophagy that results in autophagosome accumulation must be differentiated from stimuli that increase autophagic activity, defi ned as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (inmost higher eukaryotes and some protists such as Dictyostelium ) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the fi eld understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. It is worth emphasizing here that lysosomal digestion is a stage of autophagy and evaluating its competence is a crucial part of the evaluation of autophagic flux, or complete autophagy. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. Along these lines, because of the potential for pleiotropic effects due to blocking autophagy through genetic manipulation it is imperative to delete or knock down more than one autophagy-related gene. In addition, some individual Atg proteins, or groups of proteins, are involved in other cellular pathways so not all Atg proteins can be used as a specific marker for an autophagic process. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field

A Model-driven Engineering Methodology for the Development of Service-oriented Control Procedures for Automated Manufacturing Processes

The present situation of control engineering in the context of automated production can be described as a tension field between its desired outcome and its actual consideration. On the one hand, the share of control engineering compared to the other engineering domains has significantly increased within the last decades due to rising automation degrees of production processes and equipment. On the other hand, the control engineering domain is still underrepresented within the production engineering process. Another limiting factor constitutes a lack of methods and tools to decrease the amount of software engineering efforts and to permit the development of innovative automation applications that ideally support the business requirements. This thesis addresses this challenging situation by means of the development of a new control engineering methodology. The foundation is built by concepts from computer science to promote structuring and abstraction mechanisms for the software development. In this context, the key sources for this thesis are the paradigm of Service-oriented Architecture and concepts from Model-driven Engineering. To mold these concepts into an integrated engineering procedure, ideas from Systems Engineering are applied. The overall objective is to develop an engineering methodology to improve the efficiency of control engineering by a higher adaptability of control software and decreased programming efforts by reuse

A Model-driven Engineering Methodology for the Development of Service-oriented Control Procedures for Automated Manufacturing Processes

The present situation of control engineering in the context of automated production can be described as a tension field between its desired outcome and its actual consideration. On the one hand, the share of control engineering compared to the other engineering domains has significantly increased within the last decades due to rising automation degrees of production processes and equipment. On the other hand, the control engineering domain is still underrepresented within the production engineering process. Another limiting factor constitutes a lack of methods and tools to decrease the amount of software engineering efforts and to permit the development of innovative automation applications that ideally support the business requirements. This thesis addresses this challenging situation by means of the development of a new control engineering methodology. The foundation is built by concepts from computer science to promote structuring and abstraction mechanisms for the software development. In this context, the key sources for this thesis are the paradigm of Service-oriented Architecture and concepts from Model-driven Engineering. To mold these concepts into an integrated engineering procedure, ideas from Systems Engineering are applied. The overall objective is to develop an engineering methodology to improve the efficiency of control engineering by a higher adaptability of control software and decreased programming efforts by reuse

A Reference Architecture for Service-oriented Control Procedures and its Implementation with SysML and Grafchart

Innovative engineering methods are needed to enhance the adaptability and agility of industrial control procedures and concurrently manage their rising complexity. Service-oriented Architecture (SOA) constitutes a promising paradigm to meet these challenges. To apply the rather abstract SOA principles to industrial automation, a model-driven engineering method is presented in this paper. Therefore, a reference architecture is introduced providing a framework to structure and define services for control tasks in a convenient way. The application of the engineering method is supported by an implementation concept. It uses SysML during the design phase and the process modeling and control language Grafchart for the execution of service-oriented control procedures

Towards Logistics 4.0: A Skill-Based OPC UA Communication between WMS and the PLC of an Automated Storage and Retrieval System

In order to bring intralogistics systems to the same level of interoperability as today’s modern production systems, logistics must take the essential steps towards Industry 4.0. This requires an increasing abstraction level of control logic as an enabler for horizontal and vertical integration. The abstraction will lead to the interconnection of manufacturing and logistics control with the production planning and warehouse management systems (WMS). A main enabler for these communication paths are service-oriented architectures (SoA). OPC UA has established itself as a widely used and already adopted SoA-based communication standard in industry. The paper describes the realization of an OPC UA-based approach for the communication between a WMS and a PLC of an automated storage and retrieval system (ASRS). The conceptual basis of communication design are skills of the ASRS. The work is supported by an architectural design with a subsequent prototypical implementation

Acquired Sleep-Related Hypermotor Epilepsy with Disrupted White Matter Tracts Assessed by Multishell Diffusion Magnetic Resonance Imaging

Sleep-related hypermotor epilepsy (SHE) (previously frontal lobe epilepsy) is a rare seizure disorder commonly misdiagnosed or unrecognized, causing negative patient sequelae. While usually reported in familial studies, it is more commonly acquired. Diagnosis is a challenge due to its low incidence in comparison with the more common sleep disorders or psychogenic etiologies in the differential diagnosis. Diagnosis is scaled on degree of certainty based on described or clinically documented semiology, with video EEG as a helpful, but not necessary, adjunct. Current treatment is similar to other focal epilepsies. We studied a 36-year-old active duty male soldier who presented with 2 years of predominantly sleep related, abrupt, short, and anamnestic hyperkinetic movements with unstructured vocalizations. Prior workup included non-contributory video electroencephalograph (EEG) and polysomnography as well as normal brain magnetic resonance imaging (MRI). Treatments for presumed psychiatric and parasomnia disturbances were not effective in establishing diagnosis or relief. Evaluation at our tertiary, multidisciplinary care institution recorded events consistent with the diagnosis of clinical SHE. He was enrolled in an advanced multishell diffusion-weighted imaging MRI research study to evaluate white matter tracts, given his history of mild, repetitive, non-penetrating traumatic brain injury, not otherwise requiring hospitalization. Multishell diffusion MRI tractography found changes not previously described in the right frontal lobe white matter tracts. These changes were consistent with neurological localization and serve as a potential nidus for this patient’s seizure disorder. Misdiagnosis of SHE can result in detrimental biopsychosocial sequelae of untreated epilepsy, unnecessary or harmful intervention, or the stigmata of a behavioral disorder. Further investigation into diagnosis and etiology of acquired SHE is needed. Assessment for white matter abnormalities can potentially provide information into pathogenesis of epilepsy disorders